Lame DUC Helices FLASH
[VPH7-TE-FLASH]
Servomotore elettrico 12 Vdc, 22 W
Controllo del passo:
– manuale, tramite indicatore di passo
– semiautomatico, tramite regolatore di giri costanti
– completamente automatico, tramite regolatore di giri costanti sotto controllo M.A.P.
Regolazione manuale del passo delle pale in caso di guasto elettrico.
Sistema di arresto meccanico anti-reverse.
Mozzo ricavato da barra in lega di alluminio e gambo delle pale in acciaio ad alta resistenza.
Prestazioni eccellenti sull’intero inviluppo di volo del velivolo (decollo, salita, crociera e velocità massima). Elevato comfort di volo, finiture di alta qualità, basso momento di inerzia.
L’installazione della nostra elica è ridotta a una sequenza di operazioni molto semplice:
> Installazione delle spazzole e dell’anello collettore sul riduttore del motore
> Serraggio dei 6 bulloni sulla flangia elica/albero
> Montaggio di ciascuna pala nella sua sede numerata.
Features
Simple Operation
The FP-propeller is extremely simple to operate thanks to the dual mode governor. The automatic management of the engine rpm is essential in reducing pilot workload during the critical phases of flight like landing and taking off.
- The system recognize automatically the take off and landing phases
- CONSTANT RPM MODE
- FULL AUTOMATIC MODE with MAP reading
- MANUAL mode with Hub current reading


Easy installation
The installation of the propeller is very straight forward and is designed to be accomplished in a short time by any competent layperson. Included is a very comprehensive operators manual and propeller log book. The propeller comes pre-lubricated and Dynamically balanced with all the necessary hardware supplied.
- Pre-lubricated
- Pre-aligned
- Pre-balanced (Certificate provided)
- Detailed manual
Specification
Power Capacity | Up to 115hp (89.5kW) on Rotax engines |
Maximum Speed | 2500rpm |
Weight | Hub, Blades, Spinner 9.5kg (21lbs) Controller 0.3kg (0.6lbs) |
Moment of Inertia | ~0.43 kgm^2 |
Engine Type | Rotax 912, 912S, 914 or similar |
Mounting Flange | Rotax 4in [101.6mm] PCD with 13mm bush) 5/16” UNF bolts |
Hub Type | AP330 |
Configuration | Clockwise, Tractor |
Blade Type | Sensenich R66AY |
Extension | as required |
Spinner | as required |
Controllers | AC200F |
Slipring | Rotax mini (RM), Rotax standard (RS) |